1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Regal AIO Smither 1.0.11

Forging the standard for Smithing bots

  1. domdeluise35
    domdeluise35
    1/5,
    Version: 1.0.11
    Ran bot for an hour and caught a macro ban wouldn't recommend.
  2. yolodgafswag
    yolodgafswag
    1/5,
    Version: 1.0.11
    Very few fail safes, its not a very well written script and frequently has issues that cause it to repetitively click wrong spots..
  3. Prism
    Prism
    5/5,
    Version: 1.0.10
    Smooth bot with only one one bug that I can see, along with a secondary problem of the camera rotating out of view of anvil.

    The solution to the anvil problem (in varrock) is to simply make Runescape full screen. since I have done this it has not stopped once.

    I have gone from 78-88 in a matter of a week, but have been taking it slow.

    To the author: The bug I was referring to was that it will randomly deselect my bar type and piece of metal I am making, cause the bot to stop. I have noticed this multiple times, all being around 5k xp gained, after that it runs smoothly.

    Great bot, will use till 99
  4. Holden Brad147
    Holden Brad147
    4/5,
    Version: 1.0.9
    The only issue i have with this script that is if it encounters an issue rather than shutting the bot down it just stays up and counting. i wasted five hours overnight doing nothing on it and being charged. This sounds like a stupid gripe because the script is only 5 cents but it may be something she wants to look in.
  5. GoGrowth
    GoGrowth
    5/5,
    Version: 1.0.9
    I babysit it just to see how it works and it works perfectly ! Only one bad thing about this bot.. I reach 99 smith since few weeks but I can't make rune 2h probably because it's write runite 2h and not rune 2h, idk? The bot just sit in place and nothing happens. Thanks to fix it :) Awesome bot !
  6. MDV6168
    MDV6168
    5/5,
    Version: 1.0.9
    durrr if the bot cant see the anvil it stoops at bank aadurrdurrrrr its called fullscreen. Some nonce ass kids cant even figure out the most basic solutions to anything.
  7. knotsie
    knotsie
    3/5,
    Version: 1.0.9
    If the bot cant see the anvil after banking it just gets stuck and does nothing at the bank booth, I zoomed all the way out and positioned the camera so that both the bank booth and anvil are in the screen, after it smiths the inventory, it'll go to the bank, rotate the camera so it doesnt see the anvil anymore and just sits there again. Bot is literally not working like this as it can't do more than 1 inventory without needing manual interference.
  8. Tigger Biggles
    Tigger Biggles
    1/5,
    Version: 1.0.9
    Went to check on the bot after a couple of hours and it was just standing in the bank booth. If the camera isn't positioned to view the anvils it won't do anything. This really needs fixing.
  9. xbobby1235
    xbobby1235
    3/5,
    Version: 1.0.9
    Won't smith adamant bolts (unf) for some reason. Everything else works seamlessly but it gets to the smith and freezes on the smithing interface.
  10. ambigboidoboth
    ambigboidoboth
    5/5,
    Version: 1.0.9
    Works really well aside from the fact that it opens the door semi often, kinda bot looking and if people notice this it could result in a manual report. If you could fix that things would be awesome.
  11. snoozeh
    snoozeh
    4/5,
    Version: 1.0.8
    Used this bot for about 30 minutes thus far and I only see one error. Sometimes after it withdraws bars it will just sit at bank booth and click the iron bar. If you adjust the camera angle it will then click the anvil to start smithing. Happened 4 or 5 times in 30 minutes. Other than that bot works well