MaxiWoodcutter 2.23.36

It keeps stopping and says something about failed interaction with camera.

 

Hi, I'm having some difficulties cutting at a custom spot and I'm hope you can help me. It's on the island of Karamja, just outside of Tai Bwo Wannai village. There is an area for woodcutting (Mahogany and Teak) that you have to pay an entrance fee of 100 trading sticks to enter. The script bot works fine until it starts dropping the teak logs by the action bar. It drops all the teak logs, but after that it gets stuck either trying to drop the trading sticks (which it added to the action bar itself), or trying to start back cutting the tree. Occasionally, it'll seem to re-orientate itself and begin cutting again, though that doesn't happen often, and even when it does it will just get stuck again when dropping the next inventory. I'm not sure if it's the trading sticks that are causing the problem, or if it's the way that I added the spot in (I added three teak trees by using a circular area with a radius of 4). I'm attaching screenshots of where I'm cutting and of spectre at the time of the problem, hopefully they help. I'll continue to play around with it on my end to see if I can find anyway to fix it (I'm going to try going with only the min. number of trading sticks needed to enter). Thanks in advance for any help.

Edit: Sorry, looked at how to post a proper bug report and realized I left out a few things. The status at the time of incident was: tree interaction failure, turning towards tree. The custom location coordinates are 2826, 3088, dropping is the way of disposal, and I'm playing the EoC version of RS3.

 

Alright, thanks for getting back so quick, I was worried it was on my end. I've gotten it to where it can run for the most part without problem, besides some random tree interaction failures that needs me to correct. Everything is minor though, so there is no need for you to to try to push an update. Whenever you do have some free time though, have you considered adding the karamja location to the pre-defined areas?

 

Why is it taking 0,08$ everytime i (re)start the bot?
Is it possible to only charge each time it actually runs for a full hour?
I had to restart the bot several times to setup my custom location in order to work more or less flawless.
I don't expect it to cost me that much for the low use of restarting the bot to create a good custom profile.

 

My bad, thank you for the answer!
Is a shift-dropping option available? till this moment I haven't found it yet.

 

That would make this bot even better than it already is, I think many people don't use the normal drop method (right click - drop) anymore.

 

Should really get shift-drop. Lots of other bots have it, can't be too difficult I'd assume. Keep up the great work

--- Double Post Merged, Jun 10, 2017, Original Post Date: Jun 5, 2017 ---

Banking option is messed up when cutting Yews at GE. After a full Inventory the bot just stops and stands there.

 

It stands by the Yew trees and doesn't move when it's full.

 

00:05:59 DEBUG [Walker] WebPath[CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3216, y=3502, plane=0) -> CoordinateVertex(x=3220, y=3502, plane=0) -> CoordinateVertex(x=3220, y=3503, plane=0) -> CoordinateVertex(x=3221, y=3502, plane=0)]
00:09:18 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3167, 3491, 0) -> Area.Polygonal[Coordinate(3207, 3499, 0), Coordinate(3201, 3505, 0), Coordinate(3224, 3505, 0), Coordinate(3224, 3498, 0)]
00:09:20 DEBUG [Walker] WebPath[CoordinateVertex(x=3167, y=3491, plane=0) -> CoordinateVertex(x=3171, y=3493, plane=0) -> CoordinateVertex(x=3172, y=3495, plane=0) -> CoordinateVertex(x=3173, y=3496, plane=0) -> CoordinateVertex(x=3175, y=3495, plane=0) -> CoordinateVertex(x=3176, y=3494, plane=0) -> CoordinateVertex(x=3178, y=3493, plane=0) -> CoordinateVertex(x=3185, y=3493, plane=0) -> CoordinateVertex(x=3189, y=3492, plane=0) -> CoordinateVertex(x=3190, y=3491, plane=0) -> CoordinateVertex(x=3194, y=3492, plane=0) -> CoordinateVertex(x=3195, y=3492, plane=0) -> CoordinateVertex(x=3196, y=3493, plane=0) -> CoordinateVertex(x=3197, y=3495, plane=0) -> CoordinateVertex(x=3198, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3502, plane=0) -> CoordinateVertex(x=3205, y=3502, plane=0) -> CoordinateVertex(x=3206, y=3502, plane=0) -> CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3214, y=3501, plane=0)]
00:09:26 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3177, 3492, 0) -> Area.Polygonal[Coordinate(3207, 3499, 0), Coordinate(3201, 3505, 0), Coordinate(3224, 3505, 0), Coordinate(3224, 3498, 0)]
00:09:27 DEBUG [Walker] WebPath[CoordinateVertex(x=3177, y=3492, plane=0) -> CoordinateVertex(x=3178, y=3493, plane=0) -> CoordinateVertex(x=3185, y=3493, plane=0) -> CoordinateVertex(x=3189, y=3492, plane=0) -> CoordinateVertex(x=3190, y=3491, plane=0) -> CoordinateVertex(x=3194, y=3492, plane=0) -> CoordinateVertex(x=3195, y=3492, plane=0) -> CoordinateVertex(x=3196, y=3493, plane=0) -> CoordinateVertex(x=3197, y=3495, plane=0) -> CoordinateVertex(x=3198, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3502, plane=0) -> CoordinateVertex(x=3205, y=3502, plane=0) -> CoordinateVertex(x=3206, y=3502, plane=0) -> CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3214, y=3501, plane=0)]
00:09:32 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3189, 3491, 0) -> Area.Polygonal[Coordinate(3207, 3499, 0), Coordinate(3201, 3505, 0), Coordinate(3224, 3505, 0), Coordinate(3224, 3498, 0)]
00:09:34 DEBUG [Walker] WebPath[CoordinateVertex(x=3189, y=3491, plane=0) -> CoordinateVertex(x=3190, y=3491, plane=0) -> CoordinateVertex(x=3194, y=3492, plane=0) -> CoordinateVertex(x=3195, y=3492, plane=0) -> CoordinateVertex(x=3196, y=3493, plane=0) -> CoordinateVertex(x=3197, y=3495, plane=0) -> CoordinateVertex(x=3198, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3502, plane=0) -> CoordinateVertex(x=3205, y=3502, plane=0) -> CoordinateVertex(x=3206, y=3502, plane=0) -> CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3214, y=3501, plane=0)]
00:09:40 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3199, 3500, 0) -> Area.Polygonal[Coordinate(3207, 3499, 0), Coordinate(3201, 3505, 0), Coordinate(3224, 3505, 0), Coordinate(3224, 3498, 0)]
00:09:41 DEBUG [Walker] WebPath[CoordinateVertex(x=3199, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3502, plane=0) -> CoordinateVertex(x=3205, y=3502, plane=0) -> CoordinateVertex(x=3206, y=3502, plane=0) -> CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3214, y=3501, plane=0)]
00:10:47 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3207, 3503, 0) -> Yew [3221, 3502, 0]
00:10:47 DEBUG [Walker] WebPath[CoordinateVertex(x=3207, y=3503, plane=0) -> CoordinateVertex(x=3208, y=3502, plane=0) -> CoordinateVertex(x=3209, y=3502, plane=0) -> CoordinateVertex(x=3210, y=3502, plane=0) -> CoordinateVertex(x=3211, y=3501, plane=0) -> CoordinateVertex(x=3213, y=3500, plane=0) -> CoordinateVertex(x=3215, y=3502, plane=0) -> CoordinateVertex(x=3216, y=3502, plane=0) -> CoordinateVertex(x=3220, y=3502, plane=0) -> CoordinateVertex(x=3220, y=3503, plane=0) -> CoordinateVertex(x=3221, y=3502, plane=

 

ivy is not working at G.E. Also, can you add in elder trees?
00:00:00 INFO Logger Initialised - this log file can be found at C:\Users\speis\RuneMate\logs\06-19 11-34-49 - MaxiWoodcutter PRO.txt
00:00:00 INFO Logging level can be adjusted in the Preferences tab.
00:00:00 INFO MaxiWoodcutter PRO V2.2.9 started!
00:00:04 DEBUG [WebServices] New session created!
00:01:14 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3215, 3424, 0) -> Area(3213, 3498, 0 -> 3221, 3500, 0)
00:01:17 DEBUG [Walker] WebPath[CoordinateVertex(x=3215, y=3424, plane=0) -> CoordinateVertex(x=3214, y=3425, plane=0) -> CoordinateVertex(x=3215, y=3426, plane=0) -> CoordinateVertex(x=3216, y=3427, plane=0) -> CoordinateVertex(x=3216, y=3430, plane=0) -> CoordinateVertex(x=3216, y=3434, plane=0) -> CoordinateVertex(x=3215, y=3434, plane=0) -> CoordinateVertex(x=3214, y=3435, plane=0) -> CoordinateVertex(x=3214, y=3436, plane=0) -> CoordinateVertex(x=3213, y=3437, plane=0) -> CoordinateVertex(x=3212, y=3439, plane=0) -> CoordinateVertex(x=3212, y=3441, plane=0) -> CoordinateVertex(x=3212, y=3442, plane=0) -> CoordinateVertex(x=3212, y=3443, plane=0) -> CoordinateVertex(x=3212, y=3444, plane=0) -> CoordinateVertex(x=3212, y=3445, plane=0) -> CoordinateVertex(x=3212, y=3446, plane=0) -> CoordinateVertex(x=3212, y=3447, plane=0) -> CoordinateVertex(x=3212, y=3450, plane=0) -> CoordinateVertex(x=3212, y=3451, plane=0) -> CoordinateVertex(x=3212, y=3452, plane=0) -> CoordinateVertex(x=3211, y=3453, plane=0) -> CoordinateVertex(x=3210, y=3455, plane=0) -> CoordinateVertex(x=3209, y=3456, plane=0) -> CoordinateVertex(x=3208, y=3456, plane=0) -> CoordinateVertex(x=3207, y=3456, plane=0) -> CoordinateVertex(x=3206, y=3456, plane=0) -> CoordinateVertex(x=3205, y=3456, plane=0) -> CoordinateVertex(x=3204, y=3456, plane=0) -> CoordinateVertex(x=3204, y=3457, plane=0) -> CoordinateVertex(x=3203, y=3457, plane=0) -> CoordinateVertex(x=3202, y=3457, plane=0) -> CoordinateVertex(x=3201, y=3458, plane=0) -> CoordinateVertex(x=3200, y=3459, plane=0) -> CoordinateVertex(x=3200, y=3460, plane=0) -> CoordinateVertex(x=3200, y=3461, plane=0) -> CoordinateVertex(x=3200, y=3462, plane=0) -> CoordinateVertex(x=3200, y=3463, plane=0) -> CoordinateVertex(x=3200, y=3464, plane=0) -> CoordinateVertex(x=3199, y=3465, plane=0) -> CoordinateVertex(x=3199, y=3467, plane=0) -> CoordinateVertex(x=3199, y=3470, plane=0) -> CoordinateVertex(x=3199, y=3471, plane=0) -> CoordinateVertex(x=3199, y=3472, plane=0) -> CoordinateVertex(x=3199, y=3473, plane=0) -> CoordinateVertex(x=3199, y=3474, plane=0) -> CoordinateVertex(x=3200, y=3476, plane=0) -> CoordinateVertex(x=3200, y=3477, plane=0) -> CoordinateVertex(x=3200, y=3478, plane=0) -> CoordinateVertex(x=3200, y=3479, plane=0) -> CoordinateVertex(x=3200, y=3480, plane=0) -> CoordinateVertex(x=3200, y=3481, plane=0) -> CoordinateVertex(x=3200, y=3482, plane=0) -> CoordinateVertex(x=3200, y=3483, plane=0) -> CoordinateVertex(x=3200, y=3484, plane=0) -> CoordinateVertex(x=3200, y=3485, plane=0) -> CoordinateVertex(x=3200, y=3486, plane=0) -> CoordinateVertex(x=3200, y=3487, plane=0) -> CoordinateVertex(x=3200, y=3488, plane=0) -> CoordinateVertex(x=3200, y=3489, plane=0) -> CoordinateVertex(x=3200, y=3490, plane=0) -> CoordinateVertex(x=3200, y=3491, plane=0) -> CoordinateVertex(x=3200, y=3492, plane=0) -> CoordinateVertex(x=3199, y=3493, plane=0) -> CoordinateVertex(x=3199, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3501, plane=0) -> CoordinateVertex(x=3205, y=3501, plane=0) -> CoordinateVertex(x=3206, y=3500, plane=0) -> CoordinateVertex(x=3207, y=3499, plane=0) -> CoordinateVertex(x=3208, y=3498, plane=0) -> CoordinateVertex(x=3209, y=3498, plane=0) -> CoordinateVertex(x=3210, y=3498, plane=0) -> CoordinateVertex(x=3211, y=3498, plane=0) -> CoordinateVertex(x=3212, y=3498, plane=0) -> CoordinateVertex(x=3213, y=3498, plane=0) -> CoordinateVertex(x=3214, y=3498, plane=0) -> CoordinateVertex(x=3215, y=3498, plane=0) -> CoordinateVertex(x=3216, y=3498, plane=0) -> CoordinateVertex(x=3217, y=3499, plane=0)]
00:01:26 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3216, 3430, 0) -> Area(3213, 3498, 0 -> 3221, 3500, 0)
00:01:32 DEBUG [Walker] WebPath[CoordinateVertex(x=3216, y=3430, plane=0) -> CoordinateVertex(x=3216, y=3434, plane=0) -> CoordinateVertex(x=3215, y=3434, plane=0) -> CoordinateVertex(x=3214, y=3435, plane=0) -> CoordinateVertex(x=3214, y=3436, plane=0) -> CoordinateVertex(x=3213, y=3437, plane=0) -> CoordinateVertex(x=3212, y=3439, plane=0) -> CoordinateVertex(x=3212, y=3441, plane=0) -> CoordinateVertex(x=3212, y=3442, plane=0) -> CoordinateVertex(x=3212, y=3443, plane=0) -> CoordinateVertex(x=3212, y=3444, plane=0) -> CoordinateVertex(x=3212, y=3445, plane=0) -> CoordinateVertex(x=3212, y=3446, plane=0) -> CoordinateVertex(x=3212, y=3447, plane=0) -> CoordinateVertex(x=3212, y=3450, plane=0) -> CoordinateVertex(x=3212, y=3451, plane=0) -> CoordinateVertex(x=3212, y=3452, plane=0) -> CoordinateVertex(x=3211, y=3453, plane=0) -> CoordinateVertex(x=3210, y=3455, plane=0) -> CoordinateVertex(x=3209, y=3456, plane=0) -> CoordinateVertex(x=3208, y=3456, plane=0) -> CoordinateVertex(x=3207, y=3456, plane=0) -> CoordinateVertex(x=3206, y=3456, plane=0) -> CoordinateVertex(x=3205, y=3456, plane=0) -> CoordinateVertex(x=3204, y=3456, plane=0) -> CoordinateVertex(x=3204, y=3457, plane=0) -> CoordinateVertex(x=3203, y=3457, plane=0) -> CoordinateVertex(x=3202, y=3457, plane=0) -> CoordinateVertex(x=3201, y=3458, plane=0) -> CoordinateVertex(x=3200, y=3459, plane=0) -> CoordinateVertex(x=3200, y=3460, plane=0) -> CoordinateVertex(x=3200, y=3461, plane=0) -> CoordinateVertex(x=3200, y=3462, plane=0) -> CoordinateVertex(x=3200, y=3463, plane=0) -> CoordinateVertex(x=3200, y=3464, plane=0) -> CoordinateVertex(x=3199, y=3465, plane=0) -> CoordinateVertex(x=3199, y=3467, plane=0) -> CoordinateVertex(x=3199, y=3470, plane=0) -> CoordinateVertex(x=3199, y=3471, plane=0) -> CoordinateVertex(x=3199, y=3472, plane=0) -> CoordinateVertex(x=3199, y=3473, plane=0) -> CoordinateVertex(x=3199, y=3474, plane=0) -> CoordinateVertex(x=3200, y=3476, plane=0) -> CoordinateVertex(x=3200, y=3477, plane=0) -> CoordinateVertex(x=3200, y=3478, plane=0) -> CoordinateVertex(x=3200, y=3479, plane=0) -> CoordinateVertex(x=3200, y=3480, plane=0) -> CoordinateVertex(x=3200, y=3481, plane=0) -> CoordinateVertex(x=3200, y=3482, plane=0) -> CoordinateVertex(x=3200, y=3483, plane=0) -> CoordinateVertex(x=3200, y=3484, plane=0) -> CoordinateVertex(x=3200, y=3485, plane=0) -> CoordinateVertex(x=3200, y=3486, plane=0) -> CoordinateVertex(x=3200, y=3487, plane=0) -> CoordinateVertex(x=3200, y=3488, plane=0) -> CoordinateVertex(x=3200, y=3489, plane=0) -> CoordinateVertex(x=3200, y=3490, plane=0) -> CoordinateVertex(x=3200, y=3491, plane=0) -> CoordinateVertex(x=3200, y=3492, plane=0) -> CoordinateVertex(x=3199, y=3493, plane=0) -> CoordinateVertex(x=3199, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3501, plane=0) -> CoordinateVertex(x=3205, y=3501, plane=0) -> CoordinateVertex(x=3206, y=3500, plane=0) -> CoordinateVertex(x=3207, y=3499, plane=0) -> CoordinateVertex(x=3208, y=3498, plane=0) -> CoordinateVertex(x=3209, y=3498, plane=0) -> CoordinateVertex(x=3210, y=3498, plane=0) -> CoordinateVertex(x=3211, y=3498, plane=0) -> CoordinateVertex(x=3212, y=3498, plane=0) -> CoordinateVertex(x=3213, y=3498, plane=0) -> CoordinateVertex(x=3214, y=3498, plane=0) -> CoordinateVertex(x=3215, y=3498, plane=0) -> CoordinateVertex(x=3216, y=3498, plane=0) -> CoordinateVertex(x=3217, y=3499, plane=0)]
00:01:41 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3206, 3457, 0) -> Area(3213, 3498, 0 -> 3221, 3500, 0)
00:01:59 DEBUG [Walker] WebPath[CoordinateVertex(x=3206, y=3457, plane=0) -> CoordinateVertex(x=3205, y=3457, plane=0) -> CoordinateVertex(x=3204, y=3457, plane=0) -> CoordinateVertex(x=3203, y=3457, plane=0) -> CoordinateVertex(x=3202, y=3457, plane=0) -> CoordinateVertex(x=3201, y=3458, plane=0) -> CoordinateVertex(x=3200, y=3459, plane=0) -> CoordinateVertex(x=3200, y=3460, plane=0) -> CoordinateVertex(x=3200, y=3461, plane=0) -> CoordinateVertex(x=3200, y=3462, plane=0) -> CoordinateVertex(x=3200, y=3463, plane=0) -> CoordinateVertex(x=3200, y=3464, plane=0) -> CoordinateVertex(x=3199, y=3465, plane=0) -> CoordinateVertex(x=3199, y=3467, plane=0) -> CoordinateVertex(x=3199, y=3470, plane=0) -> CoordinateVertex(x=3199, y=3471, plane=0) -> CoordinateVertex(x=3199, y=3472, plane=0) -> CoordinateVertex(x=3199, y=3473, plane=0) -> CoordinateVertex(x=3199, y=3474, plane=0) -> CoordinateVertex(x=3200, y=3476, plane=0) -> CoordinateVertex(x=3200, y=3477, plane=0) -> CoordinateVertex(x=3200, y=3478, plane=0) -> CoordinateVertex(x=3200, y=3479, plane=0) -> CoordinateVertex(x=3200, y=3480, plane=0) -> CoordinateVertex(x=3200, y=3481, plane=0) -> CoordinateVertex(x=3200, y=3482, plane=0) -> CoordinateVertex(x=3200, y=3483, plane=0) -> CoordinateVertex(x=3200, y=3484, plane=0) -> CoordinateVertex(x=3200, y=3485, plane=0) -> CoordinateVertex(x=3200, y=3486, plane=0) -> CoordinateVertex(x=3200, y=3487, plane=0) -> CoordinateVertex(x=3200, y=3488, plane=0) -> CoordinateVertex(x=3200, y=3489, plane=0) -> CoordinateVertex(x=3200, y=3490, plane=0) -> CoordinateVertex(x=3200, y=3491, plane=0) -> CoordinateVertex(x=3200, y=3492, plane=0) -> CoordinateVertex(x=3199, y=3493, plane=0) -> CoordinateVertex(x=3199, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3501, plane=0) -> CoordinateVertex(x=3205, y=3501, plane=0) -> CoordinateVertex(x=3206, y=3500, plane=0) -> CoordinateVertex(x=3207, y=3499, plane=0) -> CoordinateVertex(x=3208, y=3498, plane=0) -> CoordinateVertex(x=3209, y=3498, plane=0) -> CoordinateVertex(x=3210, y=3498, plane=0) -> CoordinateVertex(x=3211, y=3498, plane=0) -> CoordinateVertex(x=3212, y=3498, plane=0) -> CoordinateVertex(x=3213, y=3498, plane=0) -> CoordinateVertex(x=3214, y=3498, plane=0) -> CoordinateVertex(x=3215, y=3498, plane=0) -> CoordinateVertex(x=3216, y=3498, plane=0) -> CoordinateVertex(x=3217, y=3499, plane=0)]
00:02:02 DEBUG [Walker] RegionPath failed, trying WebPath. Coordinate(3200, 3458, 0) -> Area(3213, 3498, 0 -> 3221, 3500, 0)
00:02:20 DEBUG [Walker] WebPath[CoordinateVertex(x=3200, y=3458, plane=0) -> CoordinateVertex(x=3201, y=3458, plane=0) -> CoordinateVertex(x=3200, y=3459, plane=0) -> CoordinateVertex(x=3200, y=3460, plane=0) -> CoordinateVertex(x=3200, y=3461, plane=0) -> CoordinateVertex(x=3200, y=3462, plane=0) -> CoordinateVertex(x=3200, y=3463, plane=0) -> CoordinateVertex(x=3200, y=3464, plane=0) -> CoordinateVertex(x=3199, y=3465, plane=0) -> CoordinateVertex(x=3199, y=3467, plane=0) -> CoordinateVertex(x=3199, y=3470, plane=0) -> CoordinateVertex(x=3199, y=3471, plane=0) -> CoordinateVertex(x=3199, y=3472, plane=0) -> CoordinateVertex(x=3199, y=3473, plane=0) -> CoordinateVertex(x=3199, y=3474, plane=0) -> CoordinateVertex(x=3200, y=3476, plane=0) -> CoordinateVertex(x=3200, y=3477, plane=0) -> CoordinateVertex(x=3200, y=3478, plane=0) -> CoordinateVertex(x=3200, y=3479, plane=0) -> CoordinateVertex(x=3200, y=3480, plane=0) -> CoordinateVertex(x=3200, y=3481, plane=0) -> CoordinateVertex(x=3200, y=3482, plane=0) -> CoordinateVertex(x=3200, y=3483, plane=0) -> CoordinateVertex(x=3200, y=3484, plane=0) -> CoordinateVertex(x=3200, y=3485, plane=0) -> CoordinateVertex(x=3200, y=3486, plane=0) -> CoordinateVertex(x=3200, y=3487, plane=0) -> CoordinateVertex(x=3200, y=3488, plane=0) -> CoordinateVertex(x=3200, y=3489, plane=0) -> CoordinateVertex(x=3200, y=3490, plane=0) -> CoordinateVertex(x=3200, y=3491, plane=0) -> CoordinateVertex(x=3200, y=3492, plane=0) -> CoordinateVertex(x=3199, y=3493, plane=0) -> CoordinateVertex(x=3199, y=3495, plane=0) -> CoordinateVertex(x=3199, y=3496, plane=0) -> CoordinateVertex(x=3199, y=3497, plane=0) -> CoordinateVertex(x=3199, y=3498, plane=0) -> CoordinateVertex(x=3199, y=3499, plane=0) -> CoordinateVertex(x=3200, y=3500, plane=0) -> CoordinateVertex(x=3201, y=3501, plane=0) -> CoordinateVertex(x=3202, y=3501, plane=0) -> CoordinateVertex(x=3203, y=3501, plane=0) -> CoordinateVertex(x=3204, y=3501, plane=0) -> CoordinateVertex(x=3205, y=3501, plane=0) -> CoordinateVertex(x=3206, y=3500, plane=0) -> CoordinateVertex(x=3207, y=3499, plane=0) -> CoordinateVertex(x=3208, y=3498, plane=0) -> CoordinateVertex(x=3209, y=3498, plane=0) -> CoordinateVertex(x=3210, y=3498, plane=0) -> CoordinateVertex(x=3211, y=3498, plane=0) -> CoordinateVertex(x=3212, y=3498, plane=0) -> CoordinateVertex(x=3213, y=3498, plane=0) -> CoordinateVertex(x=3214, y=3498, plane=0) -> CoordinateVertex(x=3215, y=3498, plane=0) -> CoordinateVertex(x=3216, y=3498, plane=0) -> CoordinateVertex(x=3217, y=3499, plane=0)]
00:03:49 DEBUG Lobby Handler has been activated!
00:07:51 INFO ---MaxiWoodcutter PRO V2.2.9---
00:07:51 INFO Runtime: 00:06:34
00:07:51 INFO Last status: Waiting for a tree to respawn. (190)
00:07:51 INFO Total profit: 0

 

sorry, it hovers over the ivy itself but never clicks